The "Brewiks 300" is the 3 HL version of the Brewiks family. It has a 470-liter brew kettle and a lauter tun with a capacity of 500 liters.
It is electrically heated with 21 kW heating power, which is located in both the walls and the bottom of the wort kettle. With a brewhouse yield of up to 74%, even worts with a content of >18° Plato can be brewed without any problems.
The brewhouse is a classic 2-vessel brewing system, consisting of a mash tun / wort kettle combination and a lauter tun / whirlpool vessel. The mash tun contains a highly efficient pump that mixes the wort and can be transported back and forth between the vessels using hoses.
Brewing control is done through a large 7-inch touch interface with recipe management, automatic mashing program, timer function, and manual operating mode.
The built-in plate heat exchanger for sparge preparation allows direct heating of tap water and gentle spraying into the lauter tun lid using nozzles. An additional hot water tank is therefore unnecessary.
The built-in tube heat exchanger for wort cooling is "hidden" in the insulated double wall of the brew kettle. This highly efficient and low-maintenance heat exchanger can cool the hot wort from 96 °C to around 18 °C in just under 40 minutes using water from tap. The resulting cooling water can be collected directly in the mash tun and reused for the next brew, saving time and energy.
| Brewiks 3HL Brewhouse | |
|---|---|
| Max. pan-full before cooking: | 450 Liters |
| Weight of mash tun: | 380 kg |
| Dimensions of mash tun (L x W x H): | 1.4m x 1.4m x 1.2m |
| Capacity of mash tun: | 470 Liters |
| Maximum amount of malt: | 100 kg |
| Heating power: | 21 kW |
| Weight of lauter tun: | 70 kg |
| Dimensions of lauter tun (L x W x H): | 1.2m x 1.2m x 0.8m |
| Capacity of lauter tun: | 500 Liters |
| Electrical connection: | CEE 5-pin IP67 - 32 A |
| Material: | EN 1.4301 |
| Volume: | 65 db |
| Original wort: | >18°P |
| Brewhouse yield / efficiency: | 74% / 92% |
Interested in the Brewiks 300 microbrewery? Then contact us for an initial consultation or request a non-binding offer directly.
